PIOX® S721 determines mass flow rate, concentration, density and other parameters by means of clamp-on ultrasonic transducers mounted on the outside of the pipe. The non-invasive acoustic technology is the system of choice when substances and processes place highest demands on safety and reliability.
Mass Flow
±1.2 % of reading ±0.01 m/s (factory calibrated)
±0.5 % of reading ±0.01 m/s (process calibration)
Concentration
up to ±0.1 % of reading
Density
up to ±0.1 % of reading
Repeatability
0.15% of reading ±0,01 m/s
Operating temperature;
Pipe temperature-40 °C … +200 °C; (up to +400 °C with WaveInjector®)
Flow velocity
0.01 … 25 m/s
Inputs
maximum 4, available are: temperature (Pt 100/1000), current, voltage, binary or temperature, density, viscosity over fieldbusses
Outputs
many combinations possible, selectable are: (switchable) current (0/4 mA … 20 mA), voltage, frequency, binary
Communication
Service Interfaces: USB, Etherne; Process Interfaces: HART, Modbus RTU/TCP, FF H1, Profibus PA, BACnet MS/TP or IP
Protection Degree
Transducers: IP65 up to IP68, ATEX (IECEx) Zone 1 / 2 certified; variants available. Material transducer mountings: Stainless steel 304 or 316
Protection degree
Measuring transmitter: up tp IP66, ATEX (IECEx) Zone 2 certifed variants; available. Housing material: Aluminium or stainless steel 316L
| Manufacturer | Flexim |
|---|---|
| Industries | Cement plants, Chemical and petrochemical industry, Coke plants and steelworks, Food industry, Gas industry, Heavy industry, Laboratories and research institutes, Pharmaceutical and cosmetics industry, Power and heat, Production of technical gases, Semiconductor industry, Sugar-factory, Water and sewage |
| Application | Gases |
| Measured parameters | Concentration of acids, ores and salts, Density |
| Additional measured parameters | Mass and volumetric flow |
tel. +48 71 332 98 00
fax +48 71 332 98 30
